UHASX Unsigned Halving Add and Subtract with Exchange Unsigned Halving Add and Subtract with Exchange exchanges the two halfwords of the second operand, performs one unsigned 16-bit integer addition and one unsigned 16-bit subtraction, halves the results, and writes the results to the destination register. For more information about the constrained unpredictable behavior of this instruction, see Architectural Constraints on UNPREDICTABLE behaviors. If CPSR.DIT is 1, this instruction has passed its condition execution check, and does not use R15 as either its source or destination: The execution time of this instruction is independent of:The values of the data supplied in any of its registers.The values of the NZCV flags. The response of this instruction to asynchronous exceptions does not vary based on:The values of the data supplied in any of its registers.The values of the NZCV flags. It has encodings from the following instruction sets: A32 ( A1 ) and T32 ( T1 ) . != 1111 0 1 1 0 0 1 1 1 (1) (1) (1) (1) 0 0 1 1 UHASX{<c>}{<q>} {<Rd>,} <Rn>, <Rm> d = UInt(Rd); n = UInt(Rn); m = UInt(Rm); if d == 15 || n == 15 || m == 15 then UNPREDICTABLE; 1 1 1 1 1 0 1 0 1 0 1 0 1 1 1 1 0 1 1 0 UHASX{<c>}{<q>} {<Rd>,} <Rn>, <Rm> d = UInt(Rd); n = UInt(Rn); m = UInt(Rm); if d == 15 || n == 15 || m == 15 then UNPREDICTABLE; // Armv8-A removes UNPREDICTABLE for R13 <c> See Standard assembler syntax fields. <q> See Standard assembler syntax fields. <Rd> Is the general-purpose destination register, encoded in the "Rd" field. <Rn> Is the first general-purpose source register, encoded in the "Rn" field. <Rm> Is the second general-purpose source register, encoded in the "Rm" field. if ConditionPassed() then EncodingSpecificOperations(); diff = UInt(R[n]<15:0>) - UInt(R[m]<31:16>); sum = UInt(R[n]<31:16>) + UInt(R[m]<15:0>); R[d]<15:0> = diff<16:1>; R[d]<31:16> = sum<16:1>;