MOV, MOVS (immediate) Move (immediate) Move (immediate) writes an immediate value to the destination register. If the destination register is not the PC, the MOVS variant of the instruction updates the condition flags based on the result. The field descriptions for <Rd> identify the encodings where the PC is permitted as the destination register. Arm deprecates any use of these encodings. However, when the destination register is the PC: The MOV variant of the instruction is an interworking branch, see Pseudocode description of operations on the AArch32 general-purpose registers and the PC. The MOVS variant of the instruction performs an exception return without the use of the stack. In this case:The PE branches to the address written to the PC, and restores PSTATE from SPSR_<current_mode>.The PE checks SPSR_<current_mode> for an illegal return event. See Illegal return events from AArch32 state.The instruction is undefined in Hyp mode.The instruction is constrained unpredictable in User mode and System mode. For more information about the constrained unpredictable behavior of this instruction, see Architectural Constraints on UNPREDICTABLE behaviors. If CPSR.DIT is 1 and this instruction does not use R15 as either its source or destination: The execution time of this instruction is independent of:The values of the data supplied in any of its registers.The values of the NZCV flags. The response of this instruction to asynchronous exceptions does not vary based on:The values of the data supplied in any of its registers.The values of the NZCV flags. It has encodings from the following instruction sets: A32 ( A1 and A2 ) and T32 ( T1 , T2 and T3 ) . != 1111 0 0 1 1 1 0 1 (0) (0) (0) (0) 0 MOV{<c>}{<q>} <Rd>, #<const> 1 MOVS{<c>}{<q>} <Rd>, #<const> d = UInt(Rd); setflags = (S == '1'); (imm32, carry) = A32ExpandImm_C(imm12, PSTATE.C); != 1111 0 0 1 1 0 0 0 0 MOV{<c>}{<q>} <Rd>, #<imm16> MOVW{<c>}{<q>} <Rd>, #<imm16> d = UInt(Rd); setflags = FALSE; imm32 = ZeroExtend(imm4:imm12, 32); if d == 15 then UNPREDICTABLE; 0 0 1 0 0 MOV<c>{<q>} <Rd>, #<imm8> MOVS{<q>} <Rd>, #<imm8> d = UInt(Rd); setflags = !InITBlock(); imm32 = ZeroExtend(imm8, 32); carry = PSTATE.C; 1 1 1 1 0 0 0 0 1 0 1 1 1 1 0 0 MOV<c>.W <Rd>, #<const> MOV{<c>}{<q>} <Rd>, #<const> 1 MOVS.W <Rd>, #<const> MOVS{<c>}{<q>} <Rd>, #<const> d = UInt(Rd); setflags = (S == '1'); (imm32, carry) = T32ExpandImm_C(i:imm3:imm8, PSTATE.C); if d == 15 then UNPREDICTABLE; // Armv8-A removes UNPREDICTABLE for R13 1 1 1 1 0 1 0 0 1 0 0 0 MOV{<c>}{<q>} <Rd>, #<imm16> MOVW{<c>}{<q>} <Rd>, #<imm16> d = UInt(Rd); setflags = FALSE; imm32 = ZeroExtend(imm4:i:imm3:imm8, 32); if d == 15 then UNPREDICTABLE; // Armv8-A removes UNPREDICTABLE for R13 <c> See Standard assembler syntax fields. <q> See Standard assembler syntax fields. <Rd> For encoding A1: is the general-purpose destination register, encoded in the "Rd" field. Arm deprecates using the PC as the destination register, but if the PC is used: For the MOV variant, the instruction is a branch to the address calculated by the operation. This is an interworking branch, see Pseudocode description of operations on the AArch32 general-purpose registers and the PC. For the MOVS variant, the instruction performs an exception return, that restores PSTATE from SPSR_<current_mode>. <Rd> For encoding A2, T1, T2 and T3: is the general-purpose destination register, encoded in the "Rd" field. <imm8> Is a 8-bit unsigned immediate, in the range 0 to 255, encoded in the "imm8" field. <imm16> For encoding A2: is a 16-bit unsigned immediate, in the range 0 to 65535, encoded in the "imm4:imm12" field. <imm16> For encoding T3: is a 16-bit unsigned immediate, in the range 0 to 65535, encoded in the "imm4:i:imm3:imm8" field. <const> For encoding A1: an immediate value. See Modified immediate constants in A32 instructions for the range of values. <const> For encoding T2: an immediate value. See Modified immediate constants in T32 instructions for the range of values. if ConditionPassed() then EncodingSpecificOperations(); result = imm32; if d == 15 then // Can only occur for encoding A1 if setflags then ALUExceptionReturn(result); else ALUWritePC(result); else R[d] = result; if setflags then PSTATE.N = result<31>; PSTATE.Z = IsZeroBit(result); PSTATE.C = carry; // PSTATE.V unchanged